The installation of a glass interior door is largely similar to the usual installation of a wooden door. The only thing is to turn to some features. First of all, not every glass in quality is suitable for the door leaf. It is very important that it be strong, hardened. So, it is worth considering even before installation where all holes will be located. After the door is placed in the furnace for subsequent hardening, it will not be cut down in any case, it will not be sawed, nor in any other way to deform.
The glass door is quite convenient and safe for operation, its installation is shown even for children’s rooms, however, despite the declared strength, such a door has one significant and serious drawback, namely, its end.
An important role is played by the correct selection of accessories. Since the holes are already prepared, all elements must fit them exactly in size. As for the color, here the choice is at the discretion of the customer. You can get by with just copper or steel fittings, or you can spend money on gilding and Swarovski crystals (in this case, the cost of the door will increase significantly).
What else can be noted about the technology of installing a glass door. The approach differs – a wooden door can be installed already at the first stage of work, a draft. After installation, it will not interfere, and nothing will be done to it. The glass door can only be installed at the end. Draft, you can only install hidden fittings. Only after the completion of all finishing work is the glass sheet itself installed. The problem can be caused by the moment when some possible deviations in size that appear during the completion of one stage of work and when moving to another. You can’t do that with a glass door. You should always keep track of the correct ratio of all sizes, otherwise the canvas will have to be ordered again, and this costs good money. In some cases, it is better to seek help from the manufacturer if the store is large, there are employees on its staff who will carry out all the necessary measurements and calculations. The cost of services is prescribed in the contract, and, as a rule, it justifies itself. Experienced specialists will carefully monitor the progress of work from beginning to end, as a result of which all the selected fittings will fit perfectly into the prepared holes.
