Before starting work, it is necessary to determine the places where the electrical wiring is carried out. After these lines have been found, we proceed to mark the places where we will drill. We take into account the fact that during work there will be a lot of dust and small particles of concrete, so we get a respirator and goggles in advance to protect breathing and eyes.
Concrete is usually drilled using two technologies using different tools. In the first case, a drill with an impact function is used. If you have started construction and you do not have enough special equipment, it is not necessary to buy it, as it is sometimes expensive. We advise you to rent construction equipment in Kursk. By clicking on the link above, you can find out how and what equipment is provided for rent. This technology is used when. If the holes are made to a shallow depth and in small quantities. Since concrete is a very durable material, one should take into account the fact that one drill is enough for a maximum of ten holes.
To drill a wall, either pobedit drills are usually used, or, as already mentioned above, a drill with a percussion function. If desired, you can start work with drills of a smaller diameter, gradually moving to a larger one. At the same time, do not forget to constantly cool the drill – for this you can use a small container with warm water, immersing the hot drill there. While working on the path of the drill, either pieces of reinforcement or stones can be found. In the first case, the drill changes to a conventional one for metal, and in the second, a punch is used.
